Video Box Generator - 610 Series & 620B

The Model 610G and 610GR Video Box Generator superimpose a video box outline, of adjustable size and position, onto a real-time video signal. The video box outline can be continuously varied from black to white and turned on or off. For control of the box's size and position, the Model 610G provides front panel H-size, H-position, V-size, and V-position controls while the Model 610GR Video Box Generator provides a DB-9 port with corresponding input pins. Size controls effect the video box symmetrically.

The loop-through input with two connectors allows connection of both a video source and a destination to the input. For instance, a camera can be connected to one of the Model 619's input connectors and a monitor to the other. In this way, the video image can be observed directly as it comes from the camera (without the box) via the loop-through input, while the image with the superimposed video box outline is present at the Model 610G's output.

Power input requirement is 6-12 VAC at about 150 mA. An AC adapter is included. The adapter is UL listed for safety and isolates the model 610G from ground in order to avoid interference inducing ground-loops.

PDF Data Sheet Description Online Ordering & Prices


Model: 610G & 610GR: Video Box Generator Video Box Generator
Pattern: Superimposes a box, adjustable in size and position
Size: 6.9"W x 4.9"L x 2.4 sloping to 1.4"H
Mounting: Free standing desktop
Power Connector: 0.125" mini-phone jack
Power Input: 9 VAC (120 VAC Adaptor included where appropriate)
Chassis: Black ABS
Video Input/Output: 1Vp-p, composite, 75 ohm, loop-thru input, (s-video optional)
Options: PAL Video, S-Video
Controls: Display (switch): Sets lines On or Off
Matt (potentiometer): Adjusts line intensity, black through gray to white
Indicator: Power LED
I/O Connectors: BNC (4-pin mini-DIN for s-video)

Model: 610G Only: Video Box Generator
Controls: Vertical Box Size (potentiometer)
Horizontal Box Size (potentiometer)
Vertical Box Center Position (potentiometer)
Horizontal Box Center Position (potentiometer)

Model: 610GR Only: Video Box Generator
Remote Inputs: Vertical Box Size (0 to +5 VDC)
Horizontal Box Size (0 to +5 VDC)
Vertical Box Center Position (0 to +5 VDC)
Horizontal Box Center Position (0 to +5 VDC)
Remote Connector: DB-9

Video Box Generator - Model 620-B & 620A-B
    Box with adjustable sides

Video Crosshair & Crossline Generator - Model 619

Video Crosshair & Crossline Generator - Model 620

PDF Data Sheet Description Online Ordering & Prices
PO Box 928    Boulder, CO 80306 USA    Tel +1-303-530-9580    Fax +1-303-530-9569   
Business Hours: 9AM to 4PM Mountain Time (GMT-7 Winter, GMT-6 Summer), excluding weekends & holidays.

Copyright 2004-2013 Colorado Video, Inc. Lookout V and Lookout-V are Trademarks of Colorado Video Inc.
Friends' Links