Video Sync Separator, Sync Stripper, Sync Generator
       315 Series


The Model 315 Video Sync Separator, Video Sync Stripper, Video Sync Generator substitute can derive or extract sync pulses from a video signal. The unit can serve as a substitute for a Video Sync Generator. The unit can extract or strip composite sync, vertical sync, and horizontal sync signals from a composite video input. The Video Sync Separator, Video Sync Stripper, is a cost-effective alternative to a genlockable video sync generator. It can be used to synchronize video equipment requiring -4 volt or +5 volt synchronization pulses to other video equipment not providing such pulses.

Three versions of the Video Sync Separator, Video Sync Stripper, Video Sync Generator substitute are available. The 315E provides negative-going 0 to -4 Volt vertical, horizontal, and composite video sync pulses through BNC connectors. The 315T provides TTL composite sync, vertical, and horizontal pulses through a female DB-9 connector. These TTL pulses are provided in both active-high and active-low formats. The 315TE provides both EIA and TTL pulses.

The loop-through input with two connectors allows the Model 315 Video Sync Separator, Video Sync Stripper, Video Sync Generator substitute to be connected in between a video source and destination. For instance, a camera can be connected to one of the Model 315's input connectors and a monitor to the other. In this way, the video image can be observed directly as it comes from the camera via the Model 315's loop-through input, while other video equipment is genlocked to the camera by means of the Model 315.

Power input requirements are 9 VAC at about 200 mA. An AC adapter is included. The adapter is UL listed for safety and isolates the Model 315 from ground in order to avoid interference inducing ground-loops.

Specifications Online Ordering & Prices

Applications

Converting an RGB Signal to RGBS
RGB Video frequently includes composite sync in the Green channel, called "Sync on Green". If you need RGBS, where the sync signal is carried on a forth cable, the Model 315E Video Sync Separator or Sync Stripper can help. Connect the Green signal to one of the 315E's input connectors and its original destination to the other input connector. The 315E will provide Composite Sync, Horizontal Drive, and Vertical Drive at its outputs!

Features

All Units: Video Sync Separator, Video Sync Stripper, Video Sync Generator
    NTSC or PAL and higher resolution formats
    Hi-Z Loop-thru input
    ABS Chassis
    9 VAC Power (120 VAC Adapter Included where appropriate)
Video Sync Separator, Video Sync Stripper, Derive Sync Pulses, Video Sync Generator

Model 315E: Video Sync Separator, Video Sync Stripper, Video Sync Generator
EIA Pulses 0 to -4 Volts (Active Low)

    Horizontal Drive
    Vertical Drive
    Composite Sync

Model 315TE: Video Sync Separator, Video Sync Stripper, Video Sync Generator
Pulses in three formats: 0 to -4 Volts (Active Low), 0 to +5 Volts (Active High), +5 to 0 Volts (Active Low)

    Horizontal Drive
    Vertical Drive
    Composite Sync
Video Sync Separator, Video Sync Stripper, Derive Sync Pulses, Video Sync Generator

Model 315T: Video Sync Separator, Video Sync Stripper, Video Sync Generator
TTL Pulses 0 to +5 Volts (Active High) and +5 to 0 Volts (Active Low)

    Horizontal Drive
    Vertical Drive
    Composite Sync



Specifications Online Ordering & Prices
  
PO Box 928    Boulder, CO 80306 USA    Tel +1-303-530-9580    sales@colorado-video.com    Fax +1-303-530-9569   
Business Hours: 9AM to 4PM Mountain Time (GMT-7 Winter, GMT-6 Summer), excluding weekends & holidays.
www.colorado-video.com

Copyright 2004-2016   Colorado Video, Inc.
Friends' Links