Video Sync Separator, Video Sync Stripper, Sync Generator        315 Series The Model 315 Video Sync Separator, Video Sync Stripper, Video Sync Generator substitute can derive or extract sync pulses from a video signal. The unit can serve as a substitute for a Video Sync Generator. The unit can extract or strip composite sync, vertical sync, field ID, back porch, and horizontal sync signals from a composite video input. The Video Sync Separator, Video Sync Stripper, is a cost-effective alternative to a genlockable video sync generator. It can be used to synchronize video equipment requiring -4 volt or +5 volt synchronization pulses to other video equipment not providing such pulses. Four versions of the Video Sync Separator, Video Sync Stripper, Video Sync Generator substitute are available. The 315E provides negative-going 0 to -4 Volt vertical, horizontal, and composite video sync pulses through BNC connectors. The 315T provides positive-going 0 to +5 Volt composite sync, vertical, horizontal, field ID, and back porch pulses through a female DB-9 connector. The 315TE provides both sets of pulses. The 315TN provides the same pulses as the 315T but negative-going. The loop-through input with two connectors allows the Model 315 Video Sync Separator, Video Sync Stripper, Video Sync Generator substitute to be connected in between a video source and destination. For instance, a camera can be connected to one of the Model 315's input connectors and a monitor to the other. In this way, the video image can be observed directly as it comes from the camera via the Model 315's loop-through input, while other video equipment is genlocked to the camera by means of the Model 315. Power input requirements are 9 VAC at about 200 mA. An AC adapter is included. The adapter is UL listed for safety and isolates the Model 315 from ground in order to avoid interference inducing ground-loops. PDF Data Sheet Description Applications Online Ordering & Prices Specifications Model: All Models: Video Sync Separator, Video Sync Stripper, Video Sync Generator Size: 4.4"W x 3.25"D x 1.5"H Mounting: Free standing Power Connector: 0.125" mini-phone jack Power Input: 9 VAC (120 VAC Adaptor included where appropriate) Chassis: Black ABS Video Input: 1Vp-p, composite, loop-through (s-video optional) Options: PAL Video, S-Video I/O Connectors: BNC (4-pin mini-DIN for s-video), DB-9 for 5 Volt Pulses Indicator: Power LED Model: 315E: Video Sync Separator, Video Sync Stripper, Video Sync Generator Outputs: 0 to -4 Volt: Vertical Drive, Horizontal Drive, Composite Sync Model: 315TE: Video Sync Separator, Video Sync Stripper, Video Sync Generator Outputs: 0 to -4 Volt: Vertical Drive, Horizontal Drive, Composite Sync 0 to +5 Volt: Vertical Drive, Horizontal Drive, Composite Sync, Field ID, Back Porch, No Signal, Level Model: 315T: Video Sync Separator, Video Sync Stripper, Video Sync Generator Outputs: 0 to +5 Volt: Vertical Drive, Horizontal Drive, Composite Sync, Field ID, Back Porch, No Signal, Level Model: 315TN: Video Sync Separator, Video Sync Stripper, Video Sync Generator Outputs: +5 to 0 Volt: Vertical Drive, Horizontal Drive, Composite Sync, Field ID, Back Porch, No Signal, Level PDF Data Sheet Description Applications Online Ordering & Prices    PO Box 928    Boulder, CO 80306 USA    Tel +1-303-530-9580    sales@colorado-video.com    Fax +1-303-530-9569    Business Hours: 9AM to 4PM Mountain Time (GMT-7 Winter, GMT-6 Summer), excluding weekends & holidays. www.colorado-video.com Copyright 2004-2008   Colorado Video, Inc. Friends' Links