Video Caliper, Video Based Measurement Device,
Video Scaler, Video Inspection Instrument
      
Model 308

Now Available for High-Definition!

The Model 308 Video Caliper, Video Micrometer, Video Scaler, Video Based Measurement system, for video image measurement & video marking, provides the means to take horizontal and vertical measurements of objects in a real-time video image.

This Video Caliper, Video Micrometer, Video Scaler, Video Inspection Instrument, Video Measurement device superimposes two vertical and two horizontal cursors onto the video display. The user can adjust the position of these cursors using front panel controls. There is a set of two controls for each direction, horizontal and vertical. The right-most control sets the distance between the cursors by moving one cursor only. The left control moves both cursors across or up and down the screen while maintaining the distance between them. This arrangement allows dimensional comparison of objects across the image without disturbing the distance between the cursors. A switch selects which dimension is shown on the 4 digit display.

Two scale adjustment controls, one each for horizontal and vertical, calibrate the meter reading for a given distance between the cursors. Calibrations must be made any time the optics or distance between the image sensor and the object under scrutiny change. These controls require a small screw driver for adjustment in order to avoid inadvertent disturbance of the calibration.

The cursors can be set to white, black, or off.

Power input requirement is 9 VAC at about 150 mA. An AC adapter is included. The adapter is UL listed for safety and isolates the model 307 from ground in order to avoid interference inducing ground-loops.


Specifications

Model: All Models of Video Caliper, Video Micrometer, Video Scaler, Video Based Measurement System Video Caliper, Video Micrometer, Video Inspection Instrument, Video Measurement System, Video Marking
Owner's Manuals: Manual-308&308A.pdf
Size: 6.9"W x 4.9"L x 2.4"H sloping to 1.4"H
Mounting: Free standing desktop
Power Connector: 0.125" mini-phone power jack
Power Input: 9 VAC (120 VAC Adaptor included where appropriate)
Chassis: Black ABS
Video Input/Output: 1Vp-p, composite, 75 ohm (s-video optional)
Options: PAL Video, S-Video
I/O Connectors: BNC (4-pin mini-DIN for s-video)
Controls Decimal (switch): Selects Decimal Display Position
Lines (switch): Selects Off, Black, or White
Calibrate (2)(pontiometers): Calibrates Display to Known Reference
Controls Read H/V (switch): Selects Between Display of H or V Dimension

Model: 308: Video Caliper, Video Micrometer, Video Scaler, Video Based Measurement System
Controls: H Position (Single-turn potentiometer): Moves Both Cursors
H Distance (Single-turn potentiometer): Moves Only Right Cursor
V Position (Single-turn potentiometer): Moves Both Cursors
V Distance (Single-turn potentiometer): Moves Only Lower Cursor

Model: 308A: Video Caliper, Video Micrometer, Video Scaler, Video Based Measurement System
Controls: H Position (Ten-turn potentiometer): Moves Both Cursors
H Distance (Ten-turn potentiometer): Moves Only Right Cursor
V Position (Ten-turn potentiometer): Moves Both Cursors
V Distance (Ten-turn potentiometer): Moves Only Lower Cursor

  PDF Data Sheet      Description       Application Notes      Online Ordering & Prices  

  
PO Box 928    Boulder, CO 80306 USA    Tel +1-303-530-9580    sales@colorado-video.com    Fax +1-303-530-9569   
Business Hours: 9AM to 4PM Mountain Time (GMT-7 Winter, GMT-6 Summer), excluding weekends & holidays.
www.colorado-video.com

Copyright 2004-2013   Colorado Video, Inc.
Friends' Links