Video Screen Splitter, Video Split Screen, Video Wiper        613 Series The Model 613 series Video Screen Splitter, Video Split Screen, Video Wiper, Video Display Splitter, Split Screen or Split Image unit can split, wipe or display two video images or a dual video image, one image over the other, top to bottom or side by side, to make portions of each viewable on a single monitor. Images from two cameras can be displayed on one video monitor. This adjustable screen splitter can split an image, mix, wipe, overlay or switch an image or display from two different CCTV video sources, creating dual video images or pictures on one screen. A front panel control selects whether the screen is split horizontally or vertically. A control knob determines the proportion of the screen allocated to each source, adjustable from 0% to 100%. Video inputs to the screen splitters from analog tape must be time base corrected. Normally, a video screen splitter cuts away a portion of each picture in order to make room on the screen for the corresponding portion of the other picture. For instance, if set for a 50%/50% split display, only 50% of each picture will be visible. Therefore, special attention should be taken in aiming the cameras at their subjects. The Video Screen Splitter Model 613 Series provides a unique "anamorphic" mode that squeezes two full pictures to fit, in their entirety, side-by-side, on your display in a 50%/50% split. This optional squeezing causes subjects to look "tall and skinny". A less expensive screen splitter without anamorphic capability is the: Video Screen Splitter - Model 616.   PDF Data Sheet      Description       Application Notes       Online Ordering & Prices    Specifications Model: 613GS: Video Screen Splitter, Video Display Splitter, Video Split Screen Inputs: Synchronization not required Size: 6.9"W x 4.9"L x 2.4"H sloping to 1.4"H Mounting: Free standing desktop Power Connector: 5.5 x 2.1 mm coaxial power jack, center-pin negative Power Input: 5 VDC (120 VAC Adaptor included where appropriate) Chassis: Black ABS Video Input/Output: 1Vp-p, composite, 75 ohm (s-video optional) Options: PAL Video, S-Video I/O Connectors: BNC (4-pin mini-DIN for s-video) Controls Split (switch): Horizontal/Vertical Position (switch): Swap/Normal Mode (switch): Cropped/Anamorphic Position (potentiometer): Left/Right or Top/Bottom Indicator: Power LED Model: 613G: Video Screen Splitter, Video Display Splitter, Video Split Screen Inputs: Synchronization not required Size: 8"W x 8"L x 1.67"H Mounting: Free standing, rack mount optional Power Connector: IEC Power Input: 120 or 240 (spec when ordering) VAC Chassis: Painted Aluminum Video Input/Output: 1Vp-p, composite, 75 ohm (s-video optional) Options: PAL Video, S-Video I/O Connectors: BNC (4-pin mini-DIN for s-video) Controls Split (switch): Horizontal/Vertical Position (switch): Swap/Normal Mode (switch): Cropped/Anamorphic Position (potentiometer): Left/Right or Top/Bottom Power (with indicator) On/Off Model: 613S: Video Screen Splitter, Video Display Splitter, Video Split Screen Inputs: Synchronization (Genlock) required Size: 6.9"W x 4.9"L x 2.4"H sloping to 1.4"H Mounting: Free standing desktop Power Connector: 0.125" mini-phone jack Power Input: 9 VAC (120 VAC Adaptor included where appropriate) Chassis: Black ABS Video Input/Output: 1Vp-p, composite, 75 ohm (s-video optional) Options: PAL Video I/O Connectors: BNC Controls Split(switch): Horizonal/Vertical Position (potentiometer): Left/Right or Top/Bottom Indicator: Power LED   PDF Data Sheet      Description       Application Notes       Online Ordering & Prices       PO Box 928    Boulder, CO 80306 USA    Tel +1-303-530-9580    sales@colorado-video.com    Fax +1-303-530-9569    Business Hours: 9AM to 4PM Mountain Time (GMT-7 Winter, GMT-6 Summer), excluding weekends & holidays. www.colorado-video.com Copyright 2004-2008Colorado Video, Inc. is a Trademark of Colorado Video Inc. Friends' Links